Window Treatments hanging from what? Knobs, Rods, Hooks, and Whatever Else You Can Think Of

There are many different ways to hang a window treatment these days. Unique ideas can really help to achieve that "wow" factor you are going for. This post will focus on unconventional as well as conventional ways to hang window treatments.
Drapery Hardware can vary from a knob to a full length drapery rod with finials, rings and brackets. Materials used to manufacture the hardware range from metal, stainless steel, resin, and wood.
The ways to use these elements in window treatment designs are only limited by your imagination!

The Helser Brothers have come up with some Old World Style wrought iron scrolls in their Artigiani Collection using two back to back finials attached to a vertical finial mount bracket. The design shown in this dining room area curved bay window alcove with a multi-layered tray ceiling calls for something special. Silk, chenille and wrought iron definitely answer that call. Note the use of the paint on the tray ceiling calls attention to the eye and draws you upward toward that beautiful scroll hardware. The use of interlining with the silk adds body to the panels.

Go check out the entire Helser Brothers Line of drapery hardware on their website.



Adding drama to a particular area of a home can be done with the use of silk, fullness, interlining, and long lengths.

This design was found on CustomCreationsbySheri from Dysert Iowa. These dramatic silk drapery panels are punctuated with an overlay valance creating depth. The full length panels with a contrasting pleat insert bring drama and warmth to this formal living room area. The rounded shape of the window grouping is framed by the wooden rods with finials. The multi layered design has the panels hung by a rod pocket versus wooden rings. The overlay valance is also hung by a rod pocket instead of rings.  Notice the placement of the pattern on the overlay valance.

The following window treatment design for a dining area, focuses on the use of pattern and color to bring interest to the otherwise plain decor. The drapery hardware used is a small diameter metal rod with metal rings and a corner joint that makes it a one piece unit allowing the crown molding to be highlighted and uninterrupted. Note the width of the drapery wouldn't allow the panels to cover the window space if they were drawn. These drapery panels remain stationary, but provide just enough pizazz to complete the room.

To see more designs from this Texas based designer, visit their site here.

For a modern sleek look, it can be a challenge to find a hardware piece to compliment the space without overdoing it. One of my "go to" drapery hardware companies is JAB. Most of their lines are contemporary and modern. A favorite of contemporary clients is the Metropolitan line. JAB is a European company with roots in Germany.
The image below depicts the JAB stainless steel flat curtain rod with a low profile and clean lines.

 The following image was found on Pinterest and is an idea of how to solve a window treatment for an arched window frame. The sheer is mounted to the wall with small rings that are screwed into the plaster. There are small sewn portions of the fabric that are gathered onto the rings with a piece of thread wrapped around each ring.  Many more variations of this can be accomplished with heavier fabrics that are lined. The dips in the fabric can be spaced closer together so that minimal light shows through at the top of the design. Hooks can be attached to the back of the treatment and attach to each of the rings.

The image below was found on google and represents another variation of using knobs to attach a valance to the wall. The soft flowing folds are just enough to block out harsh rays of sun that come in through the upper portion of the window, yet still allow plenty of view.

This image was found on Google.com.
Knobs like the ones in the valance example can be purchased as "tiebacks" or "holdbacks" from the Kirsch Designer Metals Collection.  They are available in two sizes 3" and 4" diameter.

Finials can also be used as knobs when attached to the Kirsch finial adapters as shown in the image below of a curved bay window with stationary drapery panels mounted on the finials. This design eliminates the need for a rod with multiple bends and curves. It is a bit labor intensive during installation as there are 5 to 6 finials on each panel and there are 6 panels.

The image below is an example of a traditional rod used in a non-traditional way. The length of the rod is just enough to hold the stationary panel in place with finials, rings and brackets.

The image below uses resin holdbacks mounted on 6" posts for a traditional style window treatment that was needed above plantation shutters. Dupioni embroidered silk swags that are hung from holdback posts provide a less structured approach to the scarf type window treatment. Pieces of wadded up wrapping paper were used in longer lengths of the scarf to add body and to make it stay in place.

Hopefully this post has inspired you to think "outside the box" when it comes to the use of different types of hardware to mount your window treatments for a look that really says "wow"!